Welcome to EETO Laser!
Service Hotline: +86-15527861820

How to do Alignment in Fiber Laser Cutting Machine

Date: 2018-01-25
Views: 66

How to do Alignment in Fiber Laser Cutting Machine


EETO laser cutting machine’s debugging include many aspects. Adjustment of optical path is always the first step if there is no part broken. And alignment is very important step in EETO laser cutting machine’s adjustment of optical path.

 

When customer use EETO fiber laser cutting machine, they may get the follow phenomenon if the operator changed laser head setting or hit the laser head:

1. When laser is on the nozzle will be very hot.

2. When cut a square, the cutting edge will be different for different side.

3. The cutting surface will be incline for thick plate.

 

The above problems all happened when the alignment is not good, many other factories don’t training how to do adjustment of optical path or don’t training in the right way, which lead to many customers don’t know how to adjust laser. In order to help other customers who haven’t bought our laser machine, we would like to show you how to do adjustment of optical path, and this article is main for alignment. (EETO team will provide full training include how to adjust laser, so customers who bought EETO’s fiber laser cutting machine don’t worry about this)

 

Lets take Raytools laser cutting head for reference(In fact other laser heads are similar)


How to do Alignment in Fiber Laser Cutting Machine


First of all, please using a piece of scotch tape get the laser output results as follow:


How to do Alignment in Fiber Laser Cutting Machine


Then adjust the screw as follow for the above results:

  Result 1:

  Anticlockwise adjust A&B.

Result 5:

Clockwise adjust A&B.

Result 2:

Anticlockwise adjust A and Clockwise adjust B.

Result 6:

Clockwise adjust A and Anticlockwise adjust B.

Result 3:

Anticlockwise adjust B.(Mainly adjust B)

Result 7:

Clockwise adjust B.(Mainly adjust B)

Result 4:

Anticlockwise adjust A.(Mainly adjust A)

Result 8:

Clockwise adjust A.(Mainly adjust A)

 

After use this way adjust the laser point into middle of the circle, then the alignment is finished.

 


PREV:noneNEXT:none
Request Information Form
  • 您的姓名:
  • *
  • 公司名称:
  • *
  • 地址:
  • *
  • E-mail:
  • *
  • 电话:
  • *
  • 传真:
  • *
  • 邮政编码:
  • *
  • 留言主题:
  • *
  • 详细说明:
  • *
     
Contact us
Address : Room 901, Tiyu Mansion, No. 44 Gongyuan Road
Tel : 027-84618501
Fax : 027-84618501
Mail : info@eetomachinery.com
Copyright ©2005 - 2013 武汉御拓激光设备有限公司
犀牛云提供企业云服务